Aloha,
The Clone Your Bone company is currently not taking orders. We
are sorry for any inconvenience. After over a decade in
business Clone Your Bone has decided to make some new changes.
Please don't worry we wouldn't leave
you hanging without a way to
Clone Your Bone for a good price ,so untill we get our new changes in place look below and you will find the
information you need to Clone Your Bone.
To Clone Your Bone you will need the following
Items.
Get your instruction sheets from the link on the bottom right of this page
1. Alginate impression material------ This
is obtained at dental equipment supply stores and most likely
there is one near you , It has different set times from slow to
fast,ideally you want a mix time of 1 minute and a set time of 1
to 2 minutes. Sold in 1lb packs or 2 lb.containers under many
different brand names. you will need about 8oz.of Alginate to
24.oz of water.
go to
www.yellowpages.com or
www.yellowbook.com or www.yellowusa.com
enter your search as
dental equipment and supplies and enter your city and state.You will find
addresses and phone numbers of alginate suppliers in your area. Just go
get it and save the shipping cost if you can. alginate
runs about $6.00 per pound and up.
2. Casting cup ----This is what you will pour
the casting mix in and insert your wet bone into to
make your impression , here are some ideas for
containers.
1. Use a big gulp cup from a convenience store .
2. cut the top off of a plastic bottle of water to your size.
3. A 1qt. milk container cut to size.
4. A tubular poster mailing container cut to size.
*Note. the alginate to water ratio of
8.oz alginate to 24.oz water will fill a container that
is 3" wide by up to 10" long for casting, if your
container is larger than this you will need more of each .
3. Casting Material .----- You have several
options here to cast your bone out of, from expensive
to cheap, from silicones to resins, Clone Your Bone has
always provided wax to cast with,if you ever have been to a wax
museum you would understand why this is a lifelike median to cast
with when used properly. We also provided silicone casting
instructions with our kits .
Clone Your Bone people discovered an amazingly effective way to
cast in 100% silicone for around $10.00.
Use this link on the
bottom of this page to get the silicone casting instructions along with
instructions for Cloning Your Bone and Matching Your Snatch.
Here are some options for casting materials for your
bone.
1.wax sold in grocery stores under the brand
Parowax in 1lb.boxes for about $3.00
2.100% silicone available at your local hardware store in tubes
under brands Dow Corning , GE etc. under $7.00
3.Plaster of paris available in small boxes at hobby and hardware
stores.
4. Liquid rubber, do a google search for Rubber casting material
there is a company called smooth-on that has a lot of good
casting info and products , a bit pricey though.
5. Casting resins available in hobby stores and hardware
stores.
Good Luck and most of all have a real fucking good time!
Please
Contact Us At:
C.Y.B.
P.O. Box 1093
Kurtistown, HI 96760
cloneit@earthlink.net
(808) 895-1781
