First of all, thank you for visiting our website .We are sure you will find the process of  making a piece of your self lots of fun.  The final result is very different to hold, give to a friend or play with.
I know that some of you may have reservations about putting your bone into a cup of casting mix.(Of course some of you get excited about putting your bone into anything) The casting material is safe on the skin so lets have fun and get started.
To Clone Your Bone successfully,you must follow the instructions exactly.It is the fast setting nature of the Alginate impression material that makes the Clone Your Bone TM kit perfect for casting your bone .When you are ready to go ,please remember that timing is everything.
It is crucial to time the mixing,pouring,and insertion steps with a clock or timer!

Important:Please read all instructions and tips before you begin.
How to Clone Your Bone
Before you will begin you will need                                                                                                                                                                           

* Large mixing bowl                                                                                           * Alginate at least 8oz                   
* Mixing tool like a large spoon or spatula                                                        *Casting  cup --3"circumference x length  of  penis                
* Measuring cup                                                                                                  *Casting material --wax,rubber,plaster,resin etc.
* Two pans:one to boil water one to hold wax( if using wax)                             * candle wick if casting in wax as an option
* 31/4 cups warm water per 8 oz of  alginate casting mix
*  clock with second hand for accurate timing

Step 1. Lay out all needed items listed above

step2.  pour alginate impression material into bowl, fluff with a fork ,measure 3-1/4 cups warm water and have ready to pour.

Step3. when your bone is hard and your ready to go ,pour water into bowl with alginate powder.  You are committed..Mix for exactly 60 seconds,Now,pour mixture into casting cup and insert your wet bone , you should pour and insert within 30 seconds.  Take care to not rest your bone against the sides of the mold cup.  Hold still for up to two minutes while maintaining your bone in the center.
                                        Although it feels good , resist the urge to pump the mold cup.  Hold still!
Step4. After you quit laughing at the mess you just made , lose your bone and slowly pull out of the cup.  The mold is now set.  Rinse your bone.
Step5.Now you can relax or finish the business that got you into this in the first place .Any ways melt your wax or mix your chosen casting material .
Step 6. If using Wax let cool for at least 2 hours (if using silicone or rubber its going to be a while before you can remove your bone)
Step 7.Remove your bone by whatever means works for you.
                                                                          There it is,You just immortalized a piece of yourself



                                                                  Here are some tips to help with your cloning process

* If your casting in wax ,crayons melted with your wax can give you the color you want.

 * The Clone Your Bone process is much more fun to do with a close friend ,maintaining a hard on , mixing powder, and watching a timer can be challenging alone.

* Mix as good as you can in the 60 second mixing time, A lumpy oatmeal like texture is normal.

*Make sure your bone is wet before inserting into the alginate casting cup, saliva works best but warm water isn't bad either.
If you do get it caught don't panic just gently take your time and pull it from the mix , No big deal!

*Don't dump the mix from the mold cup! its best to bring the cup up to your bone for insertion , do this by leaning foreword put one finger on the top of your bone at the base,press it down and hold in the mix.  Another technique for you guys with a bone that stands straight up is to put a string around the base a pull from behind to steady that rock hard stand up rod.

*Ideally your bone should not touch the side of the casting cup .Aim for the center, the bigger the cup the more room to play but also the      more alginate you will need.

*You can possibly reuse the alginate impression if you are careful when releasing your cloned bone. keep wet to avoid distortion.

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------










First of all, thank you for visiting our website .We are sure you will find the process of making a piece of yourself lots of fun.  The final result is very different to hold, give to a friend or play with. I know you might be wondering what to do with your matched snatch.
We provided a magnet to stick in the back that makes the most interesting note holder to ever grace your refrigerator
The casting material is safe on the skin so lets have fun and get started.
To Match Your SnatchTM successfully, you must follow the instructions exactly.  It is the fast setting nature of the Alginate impression material that makes the Match Your Snatch TM kit perfect for casting your pussy.
When you are ready to go ,please remember that timing is everything.
It is crucial to time the mixing,pouring,and insertion steps with a clock or timer!

                                       Important : read all instructions and tips before you begin

                                                              How To Match Your Snatch


Before you begin you will need :  
                                                                                                                                                                                                                                                                                                                                                          
*1casting cup ,anything to surround your pussy  
 *1 Cylinder sleave
*Large spoon or spatula                                                           
* Measuring cup                                                                                                      
*Clock with second hand for accurate timing
* Wax or your chosen casting material with mixing instructions
 *Two pans: one to boil water , one to heat wax
 *1-1/4 cups of water @90 degrees if casting with wax
*3.5 oz of Alginate per 1-1/4 water



Step 1.Lay out all your equipment needed
Step 2. pour powder into mixing bowl
Step 3. When your hot and ready to go ,pour water into bowl with mix.  You are committed.  Mix for 60 seconds exactly,now pour mix into your casting cup and press the cup onto your wet labia.(It is easier to Match Your Snatch if squatting or with one foot on the edge of the tub ).
       Hold cup firm for 2 minutes
Step 4.After you quit laughing at what you just did , gently pull out of the mold.  The mold is set.  Rinse your kitty. Even though it will not look like a good    impression continue with rest of steps.
Step 5. You will need a cylinder sleave to surround your impression , this will allow you to pour a semi deep layer of wax , press it into the alginate around your impression ---- a rigid piece of paper might work as a sleave for you.
Step 6. melt your wax and add crayons for color in a double boiler . ( a pan resting in another pan of hot water) then pour into you mold .
Step7. let cool for a couple of hours before removing your matched snatch.


                                                                                                      Tips
*To Shave or not to shave , a bare beaver always makes a good  impression, if you have ever wondered what you look like bare down there ,this is the perfect time to find out, you don't have to shave your whole bush , shaving the lips just above your slit will work fine,if you can not bear the thought of a clean shaven clam,at least trim the hair on your lips as short as possible, (be careful with those scissors)the alginate sticks to hair but you can apply baby oil to help with that .

* Make sure you muffin is wet before you before inserting into the mold cup, saliva or warm water wok nicely .
* Ideally the cup will surround your labia and clitoris only
*It is normal for excess alginate to spill from the cup as you press it onto your pussy ,the mix will stick to fabric but not a smooth surface.

We really hope you have a good time and your snatch came out awesome ,let us know how you did

-----------------------------------------------------------------------------------------------------------------------------------------

Silicone Casting Instructions is for Clone Your Bone only , if you want a silicone snatch you will need a 2 part pourable silicone.